Products

NVC-LB

- A Vertical lifting clamp for steel plates and various steel blocks.

· Features

- Due to the safety lever, the NVC-LB is convenient to use and also easy to separate the clamp after working with thick

  steel plates. Since the lever is attached to the inside of the clamp, there is a lower possibility of damage by the mid-air

  collision of clamps.

- Even for a high working place, it is easy to separate the clamp from the ground by connecting a rope to the safety lever.

· How to use

- Insert a steel plate into the inside end of the clamp's jaw opening and then lock the safety lever.

- Clamp the center of gravity of the work piece in order to equally distribute the weight of the work piece.

- When pulling the rope to release, pull it lightly with wrist snap.

· Warnings

- Do not exceed the rated capacity specified on the clamp.

- Lift a work piece only which falls within the jaw opening range specified in the instruction manual.

- Never lift two or more work pieces with one clamp.

- Lift a work piece only after checking the biting location and the biting condition of the work piece, and the proper

  functioning of the safety lever.

- When lifting a work piece, a signal man must be outside the rotation radius of a work piece to send a signal to a crane

  operator.