Products

NPC-DBP

· Application

- A screw clamp for hanging the hook of a lever block which is used with nonferrous metal materials(stainless steel and

  aluminum) for building LNG tanks, other chemical tanks and plants which require no teeth mark left by clamps.

· Features

- The NPC-DBP is a convenient and efficient clamp with the shackle which rotates 360° right and left, making work

  possible in all directions(up and down, left and right).

- For the NPC-DBP, on the upper and lower sides of the jaw opening are the flat surface swivel jaws with no tooth, and

  the body rotates on the screw as the axis, making this model convenient to use.

· How to use

- Insert a work piece into the inside end of the clamp's jaw opening and then completely tighten the screw.

· Warnings

- Before clamping, remove oil or grease on a work piece with detergent and a cloth to prevent slipping.

- Do not exceed the rated capacity specified on the clamp.

- Use a work piece only which falls within the jaw opening range specified in the instruction manual.

- If the load is placed laterally, not straightly, on the shackle, use only 1/2 of the rated capacity.

- Never lift a work piece with this model.